Ceramic Engineering Resources

Thirteen engineering guides covering specification, tolerance, surface finish, material selection, inspection and the transition from prototype to production – written for the engineers who specify the parts.

Browse the Guides

Video measuring system used for ceramic part inspection

Start Here

Featured guide

Gauge blocks and measurement standards in controlled storage

Featured · Specification

How to Specify a Custom Ceramic Part Drawing

What to put on the drawing so the quote is accurate the first time – datums, tolerances, material callouts and the inspection points that matter for ceramics.

Read the guide ›

Guides by engineering task

Thirteen guides, grouped the way specification work actually flows: define the drawing, choose the material, plan manufacture and inspection.

Drawing & GD&T

4 guides

How to Specify a Custom Ceramic Part DrawingWhat belongs on the drawing before you send it for quote.GD and T for Ceramic PartsWhich geometric callouts a ceramic process can hold – and which it cannot.Ceramic Machining Tolerance GuideWhich tolerances are realistic on which features.Common DFM Problems in Ceramic PartsDesign details that cannot be made, and the fix.

Materials & Applications

6 guides

Alumina vs ZirconiaChoosing between the two most common precision ceramics.SiC vs Si3N4Where the two structural ceramics diverge.Ceramics for Thermal ManagementWhat each ceramic does in a thermal path.Ceramics for Electrical InsulationWhat actually decides the insulating material.Ceramics in Semiconductor ManufacturingFrom equipment to component to material.Biocompatible Ceramics for MedicalThe two biocompatible ceramics and where the supplier role ends.

Manufacturing & Inspection

3 guides

Ceramic Surface Finish GuideHow to call out Ra and what each level costs.Precision Ceramic Inspection MethodsWhat is measured and for what.Prototype to ProductionThe three stages and what each proves.

Complete resource index

Scope of these guides: capability figures quoted here are the confirmed site values and are feature-specific; comparisons are qualitative unless a source is named; numeric material data is issued from the grade datasheet for a specific project.

How to Specify a Custom Ceramic Part Drawing GD and T for Ceramic Parts Ceramic Machining Tolerance Guide Common DFM Problems in Ceramic Parts Alumina vs Zirconia SiC vs Si3N4 Ceramics for Thermal Management Ceramics for Electrical Insulation Ceramics in Semiconductor Manufacturing Biocompatible Ceramics for Medical Ceramic Surface Finish Guide Precision Ceramic Inspection Methods Prototype to Production

Frequently asked

They are engineering guides. Each one solves a specification problem and then links to the commercial page that applies to it.

Confirmed capability figures come from this site. Comparisons are qualitative unless a source is named. Numeric material data is issued from the grade datasheet for a specific project.

Yes. Send the question with the drawing. A question that recurs usually becomes a guide.

No. They describe what generally applies. The review states what applies to your specific part.

Need an Engineering Review for Your Drawing?

The guides cover general practice. For part-specific manufacturability, send the drawing and receive an engineering review with your quotation.

Submit a Drawing